Installing and Protecting the REALice Wall Unit

Installing and Protecting the REALice Wall Unit

Installing the REALice system is straightforward.

Here are the most important points: 

  • Installed downstream of the final cold and hot water line with a mixing valve (or levers to adjust temperature)
  • Cold water can be used
  • At least 43PSI required
  • It is very important that 100% of the resurfacing water be treated by REALICE!

 

Here are a few examples how REALice can be installed and protected:

 

 

 

 

 

 

 

 

 

 

R6x installed horizontally, water flowing from left to right. Temperature controlled with mixing valve.

 

 

 

 

 

 

 

 

 

R10x installed vertically, water flowing downwards, low range mixing valve deployed on the left.

 

 

 

 

 

 

 

 

 

R10x installed horizontally, water flowing from left to right. Temperature controlled with levers. Locks to prevent levers to be adjusted.

 

 

 

 

 

 

 

 

 

Protecting REALice – left; with braces on the wall, right behind bars.

 

FacebooktwitterFacebooktwitter


Savings Calculator